Skip to main content

How To Flash Firmware In iPhone 6S Plus Copy MT6572 Phone

Here is the another tutorial regarding, how to flash iPhone clone smartphone which has MTK MT6572 and where to download the 100% working firmware. Today I flashed a phone with a downloaded firmware from Internet and flash the A1688 iPhone 6S Plus MT6572 smartphone but unfortunately the phone goes dead, neither it shows the preloader port nor it takes any flash anymore. I have tried almost 10 flash file or firmware downloaded from Internet but not success to flash the phone but finally I got the solution for this and here I will show where to download the A1688 MT6572 E165 firmware and how you will successfully flash the phone.

A1688 MT6572 Dead Flash OK

Note: When you flash any phone, Please take the full backup of the firmware and while flashing or download firmware to the phone, please do not select preloader on SP flash tool or Smartphone flash tool.

A1688 MT6572 iPhone 6S Plus Phone Firmware Details:

1- MT6572_e165_jb3_6s-Plus_4.2.2_iPhone_ALPS.JB3_.MP_.V1
2- iPhone 6S Plus A1688 MT6572 stockrom
3- iPhone Clone6S A1688 MT6572 OFFICIAL FIRMWARE
4- iPhone 6s plus clone model a1688 mt6572 Nand firmware
5- ROM iPhone 6S Clone A1688 MT6572 (mt6582 fake)
6- ROM IPHONE 6S PLUS A1688 MT6572
7- China iPhone Clone 6S MT6572 4.2.2 Official firmware Download
8- iPhone 6/ 6 Plus/ 6s Plus Clone Firmware
9- Flashing iPhone 6 Clone MT6572 (MT6582 Fake) and Wiping Factory 
10- iPhone MT6572 copy how to flash Dead Phone

iPhone Clone Chine Phone A1688 E165 JB3 6S Plus Dead After Flash:

After flashing the copy iPhone MT6572 phone is dead and here is the solution and how to flash the phone and recover the dead A1688 phone using some siple steps, see the below details to solve the dead A1688 MT6572 copy phone.

How to Flash A1688 iPhone 6S Plus MT6572 Clone Smartphone?

1- Download the A1688 MT6572 Firmware (Tested) Here || Mirror Link.
2- Open the SP Flash tool and select the scatter file.
3- Now click on Download and Connect the switched off phone to the PC.
4- Do not select preloader while flashing the phone and always take full firmware backup before flashing.

iPhone 6S Copy MT6572 Flash OK
A1688 MT6572 6S Copy Preloader Solution:

If the phone goes dead after flashing wrong firmware and it's not being detected by the PC or it not shows the MTK preloader port in device manager, then follow the below process to restore the MT6572 preloader using SP flash Tool.

1- Download A1688 iPhone 6S Plus Copy MT6572 Preloader Here || Mirror Link.
2- Now open the Smartphone flash tool and select scatter file.
3- First format the whole flash using the FORMAT tab on SP flash tool.
4- Now flash or Download the preloader using Download Tab on SP flash tool.
5- After Download Success, just choose the A1688 MT6572 firmware and flash the phone again.
6- Repair the IMEI of A1688 MT6572 using Flashing box or any other tool.

 Password for the Preloader .rar file is = www.freecomputertricks.in
Labels:

Comments

Post a Comment

Please Share Your Thoughts

Popular posts from this blog

F220B Hard Reset

 In this topic you will learn how to hard reset JIO LYF F220B hard reset, so please go through the post to know the step by step procedure to hard reset/factory reset F220B Jio phone using keypad. F220B Hard Reset FREE COMPUTER TRICKS JIO LYF F220B Hard Reset? Switch off the phone. Now hold the * key and then power on the phone . After power on r elease the power button only , continue holding of * key until see the recovery option. Now choose the Wipe Data/Factory Reset and Press Power button Then choose Yes and press Power button to select . After format it will back to recovery menu Then choose REBOOT SYSTEM AND press power key for OK. Now your F220B phone has been hard reset.
Post a Comment
Read more

New CSC Banner Download available in PSD format(December 2022)

Dear VLE, Ministry has approved new Common Branding  format for CSC Center in category wise. There are three types of designs: 1. First one is for CSCs providing general services, and which do not provide UCL or BC service. 2. Second one is for CSCs that provide both BC and UCL services. 3. Third one is for CSCs that provide BC services along with other services. All VLES are to install one of these branding boards at their CSC depending on the services provided.   3 CSC banner design download PSD file - free computer tricks Links to the Designs: Generic CSC Centre Banner:- Generic CSC Centre Banner sample Download  Generic CSC Centre Banner PSD format from the below link Generic CSC Centre Banner || Download Here BC+UCL Centre Banner:- BC+UCL Centre Banner sample Download  BC+UCL Centre Banner PSD format from the below link BC+UCL Centre Banner || Download Here BC Centre Banner:- BC Centre Banner sample Download  BC Centre Banner PSD format from t...
Post a Comment
Read more

Redmi 5A EDL Point - Redmi 5A Test Point - Redmi 5A Software Flashing EDL Test Point

 Hi friends, in this topic you will find the test point or edl point of Redmi 5A. As you know to flash or unlock the Redmi 5A phone you must need to put the phone into EDL mode, for which you need to short the test/edl point on the phone's motherboard, and here is the 100% solution with HD image of the Redmi 5A motherboard pointing the EDL point. So please check the below image and short the edl point to flash/unlock/frp unlock the phone, Thank you...... Redmi 5A EDL Test Pint - Free Computer Tricks Follow the above image and short the 2 points and connect the phone to PC it will be detected by the Computer and then you can flash/unlock the phone using Mobile Flashing Tool. Free Computer Tricks YouTube Channel https://www.youtube.com/c/FreecomputertricksIn/videos PSP Studio (ଓଡ଼ିଆ) https://www.youtube.com/user/part20001/videos
Post a Comment
Read more