Karbonn K34* read flash done with volcano tool v2.9.2, Karbonn K34 Star which has SPD Chip set SC6531 and can be read flash and format with volcano tool. The below is the complete tutorial how to read flash and format SC6531 Karbonn K34Star.
Before you format SC6531, first back up the flash file by read flash and then select read flash file and format. To operate SC6531 please use higher version of Volcano tool, as on February 2015 the latest version of Volcano tool is v2.9.2.
Karbonn K34 Star Read Flash Volcano Tool V2.9.2
- Open volcano tool/utility
- Go to SPD tab
- Select Boot 15 SC6531 Only
- Click on Start
 |
| Karbonn K34 Star SPD SC6531 Read Flash Done With Volcano Tool V2.9.2 |
Karbonn K34* Read Flash Volcano Tool Log File:
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.22 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM12), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310001]
FLASH ID: 00C8006000160000
Flash Type: SF_GD25LQ32
Size:0x400000(4MB)
Reading completed.
i need karbonn k34* flash file...
ReplyDeleteplease help me.....
Karbonn K34 Star SPD SC6531 Volcano Tool Flash File
DeleteBro It can read file but unable to write file in volcano box do you have any solution
ReplyDeleteIt's a SC6531 CPU, so you can read and write flash file with Volcano Tool, If you unable to write the file to the phone then there must be some hardware fault on the mobile phone, like it may be the CPU fault.
DeleteSelect the flash file and try to format, otherwise post the volcano tool write flash log file, so that we know the error.
It can read only file but unable to write file in volcano box
ReplyDeleteany one have any solution
Read Karbonn K34 Star flash file then select the flash file and do format
Delete