Coolpad After Flashing Shows Up Down Only - Solution

Coolpad After Flashing Shows Up Down Only - Solution

  October 22, 2017    PARTHASARATHI PANDA

---

Coolpad shows UP DOWN on screen when switch ON. If you are facing this problem after flash Coolpad then here is the complete solution for this, the error you see after flash is "UP DOWN" written on screen and the phone does not switch ON, it just hang on the Coolpad Logo and only shows Up and Down near Volume key.

After Flash Volume UP Down and Modem Solution:

This solution is working on all most all Qualcomm and MediaTek (MTK) Android smart phones and it's tested on Panasonic and Coolpad Qualcomm Android smart phones. If you see Volume Up and Down or Modem on start up screen after flash the Android smart phones, then please follow the below steps.

coolpad after flash up down solution

Volume UP Volume Down Modem Solution:

Steps:

• Switch ON the phone
• Connect to PC with USB cable and install ADB USB driver
• Now download ADB Tool Here
• Open adb tool
• Now type "adb devices" (without quote) and press enter key to see the connected device, if see the device here then enter the below command and press enter.
• Command = "adb shell fctest system reboot" (Type without quote)

Read More

How to Remove MTKLogger and Factory From Appearing on Each Boot

How to Remove MTKLogger and Factory From Appearing on Each Boot

  October 21, 2017    PARTHASARATHI PANDA

---

How to remove or disable MTKLogger and Factory from appearing on each boot on Android smart phone? As you know when you flash Qualcomm Android smart phones i.e. Panasonic, Coolpad and other phones or other phones runs on Qualcomm CPU, after flash when you switched on the phone, you will see the "factory" written on the top of the screen on the startup screen. So here is the solution for this problem.

How to Remove MTKLogger and Factory From Appearing on Each Boot

Step1:

How to Remove or Disable and clear MTK Logger

• Swipe the screen from top side and open notification
• Now you will see MTKLogger is running, click on this to open mtklogger
• Then click on "Stop" button to stope mtklogger (Red colour Stop button)
• After stop now click on delete button and it will open "Clear MTKLog Files"
• Now click on "CLEAR ALL" and then click "OK"

Step2:

 

How to Remove "Factory" Being Appeared on Screen

• Open Dial pad
• Dial *#9527*#
• Click on DM
• Type RD Personnel Password : 54321
• If DM Flag value is "1" Choose "OK" DM mark will become "0"
• If DM colour turn green from red, then choose "Close"
• Select "sure"
• Reboot Now "Factory" and "MTK Logger" is gone

Key Tags:

How to remove factory written on start up screen Qualcomm phones.

When switch on the phone it shows "factory" on boot screen.

After flash Panasonic modem volume up down show on screen.

After flash Coolpad note 3 shown "factory" on boot screen but phone is working fine.

After flash coolpad note 3 lite set OK, but shown "factory" on boot screen on each boot.

How to disable "factory" on coolpad smart phone.

How to bypass up down modem on coolpad phone after flash.

Read More