Dataone UTstarcom WA3002G4 Modem Wirless Configuration

Dataone UTstarcom WA3002G4 Modem Wirless Configuration

  January 11, 2013    PARTHASARATHI PANDA

---

Dataone UTstarcom WA3002G4 Modem Wirless Configuration - Dataone Broadband WA3002G4 Modem WiFi Settings:
 
Here is the way how to configure Dataone UTstarcom WA3002G4 Modem to access WiFi. To set up the modem's wifi follow the steps below.

1) Log in to your modem (IP 192.168.1.1) enter the user name and password.

2) Click on Wireless from the right panel.

3) Wireless Basic Settings, This page allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. Tick Enable Wireless, give the SSID name, Choose the Country then click on Save/Apply.

Wireless Basic Settings WA3002G4 Modem

4) Then go to Security option , where you can set the password to use the WiFi. This page allows you to configure security features of the wireless LAN interface. You can sets the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. 

Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys

Wireless Security WA3002G4 Modem

5) After configuration Click Save/Apply. now you can use the wireless facility of the UTstarcom Modem WA3002G4. It will ask the Encryption key just enter what you have set in the modem.

Read More

How to Set Up Bsnl Broadband With AN1020-20 Modem

How to Set Up Bsnl Broadband With AN1020-20 Modem

  January 11, 2013    PARTHASARATHI PANDA

---

How to Set Up Bsnl Broadband With AN1020-20 Modem - How To Configure BSNL AN1020-20 Modem?

Here I am going to show, how to configure AN1020-20 Bsnl modem to get internet. If you take a new BSNL Broadband connection with the modem and if it's not configured then this tutorial helps you to configure the AN1020-20 modem yourself.

To configure BSNL AN1020-20 Modem Follow the Steps below :

1) Open the Web browser (i.e. Mozilla Firefox, Google Chrome or Internet Explorer) and type 192.168.1.1 in address bar then press ENTER, it will ask to enter User Name and Password, type admin and admin for both User Name and Password Click OK, Now you are inside the modem page where the configuration can be done .

Note: The default IP address of the Modem is 192.168.1.1 and to log on both user name & password is admin but not all the modems has the same, it may be different.

2) Click on Configuration -----> Internet Connection form the right side panel, by default there will be many internet connections. So delete all the connections first, to delete click on select all check box then click on delete all button.

3) Click on Add Button to configure the connection.

4) Configure ATM PVC, Please enter VPI and VCI numbers for the Internet connection which is provided by your ISP. Configure as the below screen shot and Click Next.

Configure ATM PVC

5) Configure connection Type, Select Protocol: PPP Over Internet (PPPoE) Encapsulation Type: LLC/SNAP click Next.

6) Configure WAN IP Settings, Let it be default Click Next.

7) Configure Broadband User Name and Password, enter here the service name : dataone,Your Broadband User name and password provided by the ISP BSNL.

Configure Broadband User Name and Password

8) Summary, Make sure that the settings below match the settings provided by your ISP then click Apply.

9) Now Click on Admin ------> Reboot on right panel and make sure that the Reboot From : Last should be selected then click Reboot button. It will take up to 2 minutes to reboot.

Now you have done the configurations of the modem, just go to the browser and type any web address to surf.

Read More