How to read flash Forme C2+ Color mobile phone using volcano tool with the help of Rx and Tx. In this way you can also flash the Forme C2+ with Volcano Tool.
How to Find Rx and Tx Forme C2+ and Read Flash Volcano Tool
- Use Universal Jig
- Sold 5 Wire to the Universal Jig
- In Forme C2+ there is no Rx Tx mark only 6 Pins
- In forme C2+ 2pins are Ground sold any one wire to any one of these 2 pins and sold other 4 wires to other 4 pins
- Now connect the Box power to the phone
- Open Volcano tool
- Go to SPD Tab
- Select 6610/20 Boot
- Tick Auto detect Pinouts ( Remember Rx Tx should be selected not USB D+ D-)
- Select any Task i.e. Read Flash
- Click Run
 |
| Forme C2+ Rx Tx Volcano tool Read Flash |
Volcano Tool will automatically find the Rx Tx Pinout and Read the flash file of Forme C2+.
Forme C2+ Log Volcano Tool
Detection initiated, connect the phone and power on it...
Vcc: 5
Gnd: 1
RX: 3, TX: 2
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Reading completed.
The data has been saved in C:\Users\xxxx\Desktop\Forme C2+\MOCOR_09A_MP.W11.16_P2_Release_20140415_115306_FullFlash.bin, size: 4 M.
Vcc: 5
Gnd: 1
RX: 3, TX: 2
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Reading completed.
The data has been saved in C:\Users\xxxx\Desktop\Forme C2+\MOCOR_09A_MP.W11.16_P2_Release_20140415_115306_FullFlash.bin, size: 4 M.
Comments
Post a Comment
Please Share Your Thoughts