Micromax X273 SPD SC6531 CPU Read IMEI and Read Password done with Volcano tool v2.5.0. The below is the procedure to read password/phone lock code with Volcano Tool V2.5.0.
Micromax X273 Read Password Done With Volcano Tool |
Micromax X273 Read Phone Password
- Open Volcano Tool V2.5.0
- Go to SPD Tab
- Select Boot 15 SC6531
- Tick on Read IMEI & Read Password
- Tick on Auto Detect Pinouts
- Click on Run
- Connect the phone with JIG Cable
No need to press any boot key for micromax X273.
Micromax X273 CPU Type SC6531 Read Password Log:
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM12), (VID_1782&PID_4D00)
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C2002500370000
Flash Type:[MACRONIX] MX25U6435E
Size:0x800000(8MB)
[phone lock] 0000
[phone lock] 1022
One privacy lock: 1-9 or #.
Reading IMEI password completed.
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM12), (VID_1782&PID_4D00)
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C2002500370000
Flash Type:[MACRONIX] MX25U6435E
Size:0x800000(8MB)
[phone lock] 0000
[phone lock] 1022
One privacy lock: 1-9 or #.
Reading IMEI password completed.
Comments
Post a Comment
Please Share Your Thoughts