DISKO K3 SPD SC6531 Read Flash and Format Success With Volcano Tool V2.9.1

How to format and read flash of Disko K3 Mobile phone, which has a SPD 6531 CPU. The below is the process to flash the phone using Volcano Tool.

DISKO K3 CPU Details

CPU TYPE:SC6531 [65310001]

FLASH ID: 00C8006000180000

Size:0x1000000(16MB)

First do the read flash and then select the flash file and format the phone using volcano utility.

Disko K3 Format With Volcano Tool V2.9.1

• Open volcano tool
• Go to SPD tab
• Select Boot 15 SC6531
• Select Format
• Select the read flash file
• Click on Start

DISKO K3 SPD SC6531 Chip Format Success With Volcano Tool

Disko K3 Volcano Tool Log:

Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.20 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 4
  Setting...
  Find USB device:SCI USB2Serial (COM12), (VID_1782&PID_4D00)
  Pinouts setting complete!
   
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310001]
  FLASH ID: 00C8006000180000
  Size:0x1000000(16MB)
  Set to Factory successfully.