Skip to main content

Micromax A30 Flash Done With Broadcom Acar Flash Tool

Here is the way how you can flash the Micromax A30 mobile phone using flash tool, below is the procedure to flash the Micromax A30 Smarty 3.0.



Tools Required

BCM_FlashLoader_2070_release

Firmware Download

A30_R08_MMX_DS_NSL_RTM_1227_with_hookup

  • Now Open Flash Tool and Select the Flash Folder

Broadcom Acar Flash Tool Micromax A30
  • Go to Settings ---> Configuration and Click on Generate Buttons and Select the COM Port then Click on OK.


Micromax A30 Flash Tool Settings
Note: You can get the COM port details of the phone in Device Manager of the Computer, Set the correct COM Port.

  • Now remove the USB Cable and Battery form the phone and Click Start

  • Connect the USB Cable to the phone by pressing Volume Down Key, when it shows downloading start put the battery back into the phone and wait for finish the flash process.

Micromax A30 Boot key = Volume Down (-)


Labels:

Comments

  1. UnknownSeptember 12, 2014 at 2:00 PM

    download does not start....what to do?? stucked in bootloop please help me to get out of it!

    ReplyDelete

Post a Comment

Please Share Your Thoughts

Popular posts from this blog

F220B Hard Reset

 In this topic you will learn how to hard reset JIO LYF F220B hard reset, so please go through the post to know the step by step procedure to hard reset/factory reset F220B Jio phone using keypad. F220B Hard Reset FREE COMPUTER TRICKS JIO LYF F220B Hard Reset? Switch off the phone. Now hold the * key and then power on the phone . After power on r elease the power button only , continue holding of * key until see the recovery option. Now choose the Wipe Data/Factory Reset and Press Power button Then choose Yes and press Power button to select . After format it will back to recovery menu Then choose REBOOT SYSTEM AND press power key for OK. Now your F220B phone has been hard reset.
Post a Comment
Read more

New CSC Banner Download available in PSD format(December 2022)

Dear VLE, Ministry has approved new Common Branding  format for CSC Center in category wise. There are three types of designs: 1. First one is for CSCs providing general services, and which do not provide UCL or BC service. 2. Second one is for CSCs that provide both BC and UCL services. 3. Third one is for CSCs that provide BC services along with other services. All VLES are to install one of these branding boards at their CSC depending on the services provided.   3 CSC banner design download PSD file - free computer tricks Links to the Designs: Generic CSC Centre Banner:- Generic CSC Centre Banner sample Download  Generic CSC Centre Banner PSD format from the below link Generic CSC Centre Banner || Download Here BC+UCL Centre Banner:- BC+UCL Centre Banner sample Download  BC+UCL Centre Banner PSD format from the below link BC+UCL Centre Banner || Download Here BC Centre Banner:- BC Centre Banner sample Download  BC Centre Banner PSD format from t...
Post a Comment
Read more

Redmi 5A EDL Point - Redmi 5A Test Point - Redmi 5A Software Flashing EDL Test Point

 Hi friends, in this topic you will find the test point or edl point of Redmi 5A. As you know to flash or unlock the Redmi 5A phone you must need to put the phone into EDL mode, for which you need to short the test/edl point on the phone's motherboard, and here is the 100% solution with HD image of the Redmi 5A motherboard pointing the EDL point. So please check the below image and short the edl point to flash/unlock/frp unlock the phone, Thank you...... Redmi 5A EDL Test Pint - Free Computer Tricks Follow the above image and short the 2 points and connect the phone to PC it will be detected by the Computer and then you can flash/unlock the phone using Mobile Flashing Tool. Free Computer Tricks YouTube Channel https://www.youtube.com/c/FreecomputertricksIn/videos PSP Studio (ଓଡ଼ିଆ) https://www.youtube.com/user/part20001/videos
Post a Comment
Read more