Here is the way how you can flash Samsung SCH-W259 Duos CDMA + GSM using Z3X and Samsung Phone Service Tool (PST) and the below is the procedure to Flash the phone.
Samsung W259 Flashing Problem Solved !!!! |
Tools and Firmwares to Download for Samsung SCH-W259
SamsungPST_W259 For India
SamsungPST Setup
Samsung Firmware Binary W259DDDA2
Steps:
Flashing the GSM Part on Samsung W259
- Connect the Z3x box to the computer and see the COM port in Device Manager
- First install SamsungPST setup and Samsung PST_W259 For India.msi
- Then Run SamsungPST.exe (C:\Program Files\Samsung Electronics\SamsungPST)
- Click on the Model SCH-W259
- Go to SW Tab and choose software download option BIN+TFS(GSM)
- Select the GSM Flash file and Click on Start Software Download
- It will ask to select the COM Port Choose the Z3x COM Port and Click on OK
- One pop up will open just click OK
- Now connect the Phone to Z3x Box using RJ45 Cable an Press the Power Button (E210 Cable)
- The download process will start and takes about 30 minutes to complete
Note: Don't click on Rebuild.
Samsung SCH-W259 Flash done with Samsung PST and Z3x |
Flashing the CDMA Part Samsung W259
- After complete the GSM Flash Close the Samsung PST and Open it again
- Then Select EMERGENCY(CDMA)
- Open the CDMA File W259DDDA2.bin
- COM port setting should be the Modem COM Port (Setup-->Port Setting)
- Click on Start Software Download
- Now connect the USB Cable to the phone by pressing 9
Note:
Use E210 USB Cable to flash CDMA Part
Use E210 UART Cable to flash GSM Part
Comments
Post a Comment
Please Share Your Thoughts