Skip to main content

YXTEL G926 Pattern Unlock Done With Volcano Tool v2.5.3 - www.FreeComputerTricks.in

YXTEL G926 pattern lock remove, hard reset and GMail account reset done with volcano tool v2.5.3. Follow the below process to hard reset YXTEL G926 with volcano box.


YXTEL G926 hard reset done Volcano Tool


YXTEL G926 Format Done with Volcano Tool (CPU=SPD 6820/8810)


yxtel g926 format success with volcano tool


YXTEL G926 Format Log:


Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.39 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
  Setting...
  Find USB device:SCI USB2Serial (COM37), (VID_1782&PID_4D00)
  Pinouts setting complete!
    


  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.1
  Boot downloaded.
  Flash ID: 00C800BC90555400
  FLASH LEN:0x20000000
  mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock)
  Analysis flash internal data successfully.
>>Set to Factory successfully.


Labels:

Comments

  1. UnknownApril 16, 2014 at 9:45 PM

    Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Find USB device:SPRD U2S Diag (COM35), (VID_1782&PID_4D00)

    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    >>Spreadtrum Boot Block version 1.1

    ReplyDelete
    Replies
    1. PARTHASARATHI PANDAApril 17, 2014 at 10:58 PM

      Watch the image carefully
      and do as shown in the image

      SPD TAB
      CPU TYPE 6820/8810
      FORMAT
      RUN

      Delete
  2. UnknownApril 16, 2014 at 9:46 PM

    help me bro..

    ReplyDelete
    Replies
    1. PARTHASARATHI PANDAApril 17, 2014 at 10:56 PM

      Go to spd tab
      Select boot 14 6820/8810
      Now try to format

      Delete
  3. PARTHASARATHI PANDAApril 17, 2014 at 12:12 AM

    Go to spd tab
    Select boot 14 6820/8810
    Now try to format

    ReplyDelete
  4. Praveen ENRDecember 6, 2015 at 9:47 PM

    hi where is the link for software

    ReplyDelete
    Replies
    1. PARTHASARATHI PANDADecember 8, 2015 at 1:44 PM

      This software do not work without Volcano box, If you have volcano box then download Volcano tool V3.0.9 and read flash and then format the phone.

      Download Volcano Tool V3.0.9
      http://www.mediafire.com/download/u873t5nl20puj3s/VolcanoUtility_v3.0.9_Volcano+Module.rar

      Delete
  5. UnknownMarch 31, 2016 at 4:35 PM

    thanks

    ReplyDelete
    Replies
    1. PARTHASARATHI PANDAMarch 31, 2016 at 5:57 PM

      Welcome
      Visit www.FreecomputerTricks.in for more updates and tricks.

      Delete

Post a Comment

Please Share Your Thoughts

Popular posts from this blog

F220B Hard Reset

 In this topic you will learn how to hard reset JIO LYF F220B hard reset, so please go through the post to know the step by step procedure to hard reset/factory reset F220B Jio phone using keypad. F220B Hard Reset FREE COMPUTER TRICKS JIO LYF F220B Hard Reset? Switch off the phone. Now hold the * key and then power on the phone . After power on r elease the power button only , continue holding of * key until see the recovery option. Now choose the Wipe Data/Factory Reset and Press Power button Then choose Yes and press Power button to select . After format it will back to recovery menu Then choose REBOOT SYSTEM AND press power key for OK. Now your F220B phone has been hard reset.
Post a Comment
Read more

New CSC Banner Download available in PSD format(December 2022)

Dear VLE, Ministry has approved new Common Branding  format for CSC Center in category wise. There are three types of designs: 1. First one is for CSCs providing general services, and which do not provide UCL or BC service. 2. Second one is for CSCs that provide both BC and UCL services. 3. Third one is for CSCs that provide BC services along with other services. All VLES are to install one of these branding boards at their CSC depending on the services provided.   3 CSC banner design download PSD file - free computer tricks Links to the Designs: Generic CSC Centre Banner:- Generic CSC Centre Banner sample Download  Generic CSC Centre Banner PSD format from the below link Generic CSC Centre Banner || Download Here BC+UCL Centre Banner:- BC+UCL Centre Banner sample Download  BC+UCL Centre Banner PSD format from the below link BC+UCL Centre Banner || Download Here BC Centre Banner:- BC Centre Banner sample Download  BC Centre Banner PSD format from t...
Post a Comment
Read more

Redmi 5A EDL Point - Redmi 5A Test Point - Redmi 5A Software Flashing EDL Test Point

 Hi friends, in this topic you will find the test point or edl point of Redmi 5A. As you know to flash or unlock the Redmi 5A phone you must need to put the phone into EDL mode, for which you need to short the test/edl point on the phone's motherboard, and here is the 100% solution with HD image of the Redmi 5A motherboard pointing the EDL point. So please check the below image and short the edl point to flash/unlock/frp unlock the phone, Thank you...... Redmi 5A EDL Test Pint - Free Computer Tricks Follow the above image and short the 2 points and connect the phone to PC it will be detected by the Computer and then you can flash/unlock the phone using Mobile Flashing Tool. Free Computer Tricks YouTube Channel https://www.youtube.com/c/FreecomputertricksIn/videos PSP Studio (ଓଡ଼ିଆ) https://www.youtube.com/user/part20001/videos
Post a Comment
Read more