Skip to main content

How to Flash Samsung E1207T With Z3X - www.FreeComputerTricks.in

How to flash samsung e1207t with z3x? Z3X does not have this model, so to flash samsung e1207t with z3x follow the below steps.


Samsung E1207T Flashing Process With Z3X

 
  • Open Samsung 2G Tool
  • Select Model E1202
  • Select Z3X COM Port
  • Select Flash Files
  • Click on Firmware



How to flash Samsung E1207T with Z3X

Samsung E1207T Flash Z3X Log:

Selected model: E1202
Selected com port: COM97
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 0004
Set speed - Fail
Send loaders - fail
Patch MSL - FAIL
Elapsed time: 9 second, sw ver: 3.5.0040

If you got this error "Set speed - Fail" while flashing e1207t with z3x Press the power button 3 to 4 seconds after connect the USB Cable to the phone.

------------------------------------------------------------------
Selected model: E1202
Selected com port: COM97
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: F8F1
Sending loader2... OK
Please wait for patching firmware...
Already patched SW
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master IMEI: 00000000000000
Phone slave IMEI: 00000000000000
Phone SW: E1207TDDMF4
Phone CSC: E1207TODDLJ2
Phone BT ADDR: 0000-00-000000
Phone SN: RZ1D825C53
Deactivated MSL - TRUE
[FREZEE]: 73246500
[NET Lock]: 00000000
[Subset Lock]: 00000000
[SP Lock]: 00000000
[CP Lock]: 00000000
[Sim Lock]: 00000000
[Phone Lock]: 84867195
Read info - ok
Elapsed time: 52 second, sw ver: 3.5.0040
------------------------------------------------------------------
Labels:

Comments

  1. UnknownNovember 25, 2014 at 3:45 PM

    hw to write imei...

    ReplyDelete
  2. ponselNovember 29, 2015 at 8:24 AM

    Selected model: E1202
    Selected com port: COM8
    Selected speed port: 921600
    Please, connect phone and press power button 3 seconds
    Phone Detected
    Sending loader1... OK
    Flash ID: F816
    Sending loader2... OK
    Please wait for patching firmware...
    Timeout damp
    Read - fail
    Patch MSL - FAIL
    Elapsed time: 72 second, sw ver: 3.5.0040

    ReplyDelete
    Replies
    1. PARTHASARATHI PANDANovember 30, 2015 at 11:43 AM

      While connect USB cable to phone just press power key for 3-4 seconds and try.

      Delete

Post a Comment

Please Share Your Thoughts

Popular posts from this blog

F220B Hard Reset

 In this topic you will learn how to hard reset JIO LYF F220B hard reset, so please go through the post to know the step by step procedure to hard reset/factory reset F220B Jio phone using keypad. F220B Hard Reset FREE COMPUTER TRICKS JIO LYF F220B Hard Reset? Switch off the phone. Now hold the * key and then power on the phone . After power on r elease the power button only , continue holding of * key until see the recovery option. Now choose the Wipe Data/Factory Reset and Press Power button Then choose Yes and press Power button to select . After format it will back to recovery menu Then choose REBOOT SYSTEM AND press power key for OK. Now your F220B phone has been hard reset.
Post a Comment
Read more

New CSC Banner Download available in PSD format(December 2022)

Dear VLE, Ministry has approved new Common Branding  format for CSC Center in category wise. There are three types of designs: 1. First one is for CSCs providing general services, and which do not provide UCL or BC service. 2. Second one is for CSCs that provide both BC and UCL services. 3. Third one is for CSCs that provide BC services along with other services. All VLES are to install one of these branding boards at their CSC depending on the services provided.   3 CSC banner design download PSD file - free computer tricks Links to the Designs: Generic CSC Centre Banner:- Generic CSC Centre Banner sample Download  Generic CSC Centre Banner PSD format from the below link Generic CSC Centre Banner || Download Here BC+UCL Centre Banner:- BC+UCL Centre Banner sample Download  BC+UCL Centre Banner PSD format from the below link BC+UCL Centre Banner || Download Here BC Centre Banner:- BC Centre Banner sample Download  BC Centre Banner PSD format from t...
Post a Comment
Read more

Redmi 5A EDL Point - Redmi 5A Test Point - Redmi 5A Software Flashing EDL Test Point

 Hi friends, in this topic you will find the test point or edl point of Redmi 5A. As you know to flash or unlock the Redmi 5A phone you must need to put the phone into EDL mode, for which you need to short the test/edl point on the phone's motherboard, and here is the 100% solution with HD image of the Redmi 5A motherboard pointing the EDL point. So please check the below image and short the edl point to flash/unlock/frp unlock the phone, Thank you...... Redmi 5A EDL Test Pint - Free Computer Tricks Follow the above image and short the 2 points and connect the phone to PC it will be detected by the Computer and then you can flash/unlock the phone using Mobile Flashing Tool. Free Computer Tricks YouTube Channel https://www.youtube.com/c/FreecomputertricksIn/videos PSP Studio (ଓଡ଼ିଆ) https://www.youtube.com/user/part20001/videos
Post a Comment
Read more