How to flash Karbonn K22+ using Volcano Tool? the below is the process to flash Karbonn K22+ with Volcano Tool V3.0.0. The karbonn K22+ has SPD SC6531 CPU, to flash the phone first read flash or download flash file then select the flash and format or do the wright flash option.
Karbonn K22+ CPU Info:
CPU TYPE:SC6531 [65310001]
FLASH ID: 00C8006000160000
Flash Type: SF_GD25LQ32
Size:0x400000(4MB)
Karbonn K22 Plus SC6531 Format With Volcano Tool
Open volcano tool
Go to SPD tab
Select boot 15 (SC6531)
Click on Start
Connect the phone using volcano JIG Cable
Karbonn K22+ SPD SC6531 Format Done With Volcano Tool V3.0.0 |
Note: As the karbonn K22+ has SC6531 CPU, before do anything first Read flash of the phone, then you can format the phone, just select the flash file and format then click on start.
Karbonn K22+ Format Log Volcano Tool:
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.08 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310001]
FLASH ID: 00C8006000160000
Flash Type: SF_GD25LQ32
Size:0x400000(4MB)
Set to Factory successfully.
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.08 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310001]
FLASH ID: 00C8006000160000
Flash Type: SF_GD25LQ32
Size:0x400000(4MB)
Set to Factory successfully.
My k22plus phone is a new one but when I insert the sim it is not working. It says no signal. Please help how to resolve - latharagavan@gmail.com
ReplyDeleteHi
DeleteIf the phone is new one it's better to show it on a Karbonn Service Center otherwise you can try the below.
1) First check the IMEI on sticker and match with the phone's IMEI by dialing *#06#
2)Change the SIM card and check.
3)Check whether the dual SIM is deactivated or not.
4)Check the Network settings and try search network manually.
5)You can check the Network ways of Karbonn K22 Plus on the mother board (If you are a Mobile Technician).
Follow the above steps carefully and if you are not able to do that, you can go to any nearest mobile service center.
Thanks & Regards
Free Computer Tricks
thanks
ReplyDelete