Smart Phone Flash Tool Error Collection and Possible Solution

Smart Phone Flash Tool Error Collection and Possible Solution

  August 13, 2017    PARTHASARATHI PANDA

---

Here are some error comes, while you use SP flash tool or Smartphone flash tool to flash MTK phones. So here you will see the error message and find a possible solution regarding that, If you need to share your success of solution about the SP flash tool errors, then you can post through comments. Please see the below errors for Smart Phone Flash Tool and Solution.

Smart Phone Flash Tool Errors and Solutions

Flash Tools Error Collection & Possible Solution Here:

Here is the few solution for Smart Phone Flash Tool errors, just follow the below error messages and solution.

Credits: SP tools

1.BROM Error

S_UNKNOWN_TARGET_BBCHIP

[Description]
Unsupported target baseband chip type!

[Solution]
Please upgrade to the latest Flash Tool then try again.

S_UNSUPPORTED_VER_OF_BOOT_ROM

[Description]
Unsupported Boot ROM!

[Solution]
Please upgrade to the latest Flash Tool then try again.

S_SEC_INFO_NOT_FOUND

[Description]
Your ROM files doesn't enable secure feature! Secure-on BB must boot up with secure-on ROM files!

[Solution]
Please use a secure-on ROM file then try again.

S_BROM_DOWNLOAD_DA_FAIL

[Description]
[H/W] Fail to download DA to baseband chip's internal SRAM!

[Reason]
1.There’s a cable communication problem between Flash Tool and Boot ROM.
2.Target might be shutdown unexpectedly or target lost power supply.
3.The DA is not correct.

[Solution]
1.Try again.
2.Proceed H/W checking in download cable and target side com port.
3.Monitor if power-drop occurred in target side.

S_BROM_BBCHIP_HW_VER_INCORRECT

[Description]
[H/W] Target baseband chip is inconsistent with bin files!

[Solution]
Please select the correct image files for the target's baseband chip.

S_BROM_AUTOBAUD_FAIL

[Description]
[H/W] Boot ROM start command passed but fails to multiple Boot ROM baud rate!

[Reason]
1.There's a cable communication problem between Flash Tool and Boot ROM.
2.Target might be shutdown unexpectedly.

[Solution]
1.Try again.
2.Speed-Up Boot ROM baud rate” in advance mode (CTRL+ALT+V) then try again.
3.Proceed H/W checking in download cable and target side UART path.
4.Monitor if power-drop occurred in target side.

S_BROM_EXCEED_MAX_DATA_BLOCKS

[Description]
[MAUI] The number of Multi-Bin files is more than 10!

[Solution]
1.Please don't build more than 10 binary files.

S_DA_INT_RAM_ERROR

[Description] 
The download image is not match with phone memory.

[Solution] 
Please select correct image to match with phone memory and try again.

S_DA_EXT_RAM_ERROR

[Description] 
[H/W] DA didn't detect external RAM!

[Solution]
It maybe a SMT or an EMI issue, please use another phone to download.

S_DA_NAND_BLOCK_DATA_UNSTABLE

[Description] 
[H/W] Data of the block is unstable after erasing NAND Flash!

[Reason]
It maybe a SMT issue.

[Solution]
Please format all flash or use another phone to download.

S_SECURITY_SLA_INVALID_AUTH_FILE

[Description]

[User] An invalid authentication file is used!

[Solution]

This error message will occurs with MSP (MTK Secure Platform) code, Please keep up the MSP code and ask for help.

S_SECURITY_SF_SECURE_VER_CHECK_FAIL

[Description]

[User] The secure version of the secure-MAUI is older than that in the handset

[Solution]

Please choose a secure-MAUI with an equal or newer secure version.

S_SECURITY_DAA_FAIL

[Description]
lDA Security download error!

[Solution]
Security DA is not signed by a correct key, please select correct DA and try again.

S_DA_UPDATE_BOOTLOADER_EXIST_MAGIC_NOT_MATCHED

[Description]
DA DSP_BL check exist error.

[Solution] 
There is no DSP_BL in previous load on target, please format all and download again.

Read More

Smart Phone Flash Tool Error NO_SPACE (5069)

Smart Phone Flash Tool Error NO_SPACE (5069)

  May 03, 2016    PARTHASARATHI PANDA

---

When you flash or write firmware of upgrade firmware using Smart Phone Flash Tool or SP Flash Tool, sometimes you get some error messages, one of the most common error message is BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069), so here is the tutorial about how to solve this error on Smart Phone Flash Tool and why this error message comes.

Smart Phone Flash Tool No Space Error Message:

1) MediaTek SP Flash Tool V5.13.52.200

Build: 2013/12/26 14:40 (0x88123f2e)

BROM Exception! ( BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

2) MediaTek SP Flash Tool v5.1612.00

Build: 2016/03/22 22:49 (0x331524)

BROM Exception! ( BROM ERROR : S_DL_PMT_ERR_NO_SPACE (0x13CD)

SP Flash Tool v5.1352.01 BROM ERROR  S_DL_PMT_ERR_NO_SPACE (5069)

Why This Error No Space 5069?

This message is commonly comes when you try a different version of firmware or flash file to flash the phone. So to flash a phone just check the version info on the IMEI sticker and flash the correct firmware according to the hardware version of the phone. This type of mistake happens when you flash the same model with different hardware info i.e. Micromax A120 has two variant 8GB ROM and 4GB ROM, so here if you flash the 8GB ROM firmware on 4GB ROM phone then you will get this error message. so finally the error 5069 message means there is no space on the phone to write the firmware you have selected.

Note: The firmware version may same but the primary partition and other partitions on the phone is different from the firmware you selected depends on the MTK scatter file.

SP_Flash_Tool_v5.1612 BROM ERROR  S_DL_PMT_ERR_NO_SPACE (0x13CD)

How to Solve This Error Message?

In this case you must download correct firmware i.e. H/W version, S/W version, ROM size and Partition size should be same and flash the phone. The version and chipset may same but if there is a little different on the firmware then this error message will come.

This type of error message I faced on Micromax A120 and other Android smart phones, so when you flash a Android smart phone first take a full backup of the firmware (you can use Miracle box to read flash) then flash the phone if not success write back the firmware you read before.

Read More

How to Flash Micromax A75 Using SP Flash Tool

How to Flash Micromax A75 Using SP Flash Tool

  May 05, 2015    PARTHASARATHI PANDA

---

Here is the process to flash Micromax A75 with Smartphone flash tool. The below is the step by step process to flash the Micromax Mobile phone using flash tool.

Micromax A75 CPU Details:

Media Tek CPU (MT6572)

Downloads:

Micromax A75 Firmware/Flash File (Micromax_A75_0201_V3021.rar

SmratPhone Flash tool (SP Flash Tool v3.1344.214)

Micromax A75 Flash Done with SP flash tool using Modified Cable

Micromax A75 Flash With SP Flash Tool

• Open SP flash tool
• Load MT6573_Android_scatter.txt
• Click on Download
• Connect the phone using Modified USB Cable

Read More

Samsung S5263 Successfully Flashed With UFS3 Without Any Error - 100% Solved

Samsung S5263 Successfully Flashed With UFS3 Without Any Error - 100% Solved

  December 12, 2013    PARTHASARATHI PANDA

---

The Samsung S5263 has been flashed by using UFS3 with no more error messages, if you are getting any error message like app Image write failed and csc Image write failed then do the following trick to override the error and enjoy. The trick has been tested by me and recently done with Samsung S5263 Mobile Phone to Unlock. 

Samsung S5263 No more error on CSC and App Image Write Failed and Successfully Flash with UFS3

BOOT CHANGE IN UFS

• Select Boot Change 

• Select boot from folder any boot file 

• Now your device will restart after restart remove battery and put the mobile to Download/Modem Mode Vol- + Call + Power Button 

• Then Flash in Normal way with UFS (Samsung Tools HWK v2.3.0.2 by SarasSoft  

• Flash Files S5263DDKA5_ODD Can be download from support site 

Samsung S5263 Flashing Done with UFS3 without any errors

*************************************

PING: OK, COM18 - REGENT
File: \S5263DDKA5_ODD\apps_compressed.bin
Regions : India
Language: en(bn,gu,hi,kn,mr,ms,pa,ta,te)                       
Release : 2011 January Rev: 5
S5260-bin, START: 00200000 SIZE: 02A40000 VERS: S5263DDKA5
bin Image Write Done, 44302336 byte(s), Time: 01:58
File: \S5263DDKA5_ODD\Rsrc_S5263_India.rc1
S5260-rc1, START: 03100000 SIZE: 01080000
rc1 Image Write Done, 17301504 byte(s), Time: 00:35
File: \S5263DDKA5_ODD\Rsrc2_S5263(Low).rc2
S5260-rc2, START: 0F180000 SIZE: 000B61BC
rc2 Image Write Done, 747520 byte(s), Time: 00:01
File: \S5263DDKA5_ODD\FactoryFs_S5263_India.ffs
S5260-ffs, START: 05400000 SIZE: 01403E00
FS Formated
ffs Image Write Done, 20987904 byte(s), Time: 00:44
File: \S5263DDKA5_ODD\ShpApp.app
S5260-app, START: D0000000 SIZE: 00974000
app Image Write Done, 9912320 byte(s), Time: 00:18
File: \S5263DDKA5_ODD\CSC_S5263_India_ODD.csc
S5260-csc, START: C0000000 SIZE: 0125E004
csc Image Write Done, 19261440 byte(s), Time: 01:16
All Done, Restarting Product, Time: 05:08

********************************************* 

In the case of CSC_S5263_India_ODD.csc and ShpApp.app Write Error do the above trick "Boot Change" and then flash the phone with UFS.

Enjoy!!

Parthasarathi Panda

Freecomputertricks.in

Read More