Skip to main content

Samsung S5830i Flash Done With Odin3 V1.85 - How To Flash Samsung S5830i

How to flash Samsung S5830i using ODIN3?

Follow the below steps to flash your Samsung s5830i with Odin3

File Needed

Samsung Firmware i.e. S5830IXXLK3_OXELH1 which can be download from support area or using Google Search

Odin3_v1.85 with Pit (Odin3 v1.85 and totoro_0623.pit)


Flash Samsung S5830i with Odin 3




Steps:


  • Open Odin 3

  • Click on PIT Tab and Select totoro_0623.pit file

  • Click on BOOTLOADER and Select BOOT_S5830iXXLK1_REV00.tar

  • Click on PDA and Select PDA_S5830iXXLK3_REV00.tar

  • Click on PHONE and Select MODEM_S5830iXXLK1_REV00.tar

  • Click on CSC and Select GT-S5830i-MULTI-CSC-OXELH1_RST.tar

  • Put the Samsung S5830i to Download Mode ( Volume Down + Volume Up + Power Key, then Volume UP)

  • Connect the Phone to your computer with USB Cable

  • Then Click on Start wait until complete




That's all Now you have flashed your Samsung S5830i mobile phone


Note: You may need Samsung Mobile USB Drivers, so for that it's better to install Samsung Kies on the Computer.
Labels:

Comments

Post a Comment

Please Share Your Thoughts

Popular posts from this blog

F220B Hard Reset

 In this topic you will learn how to hard reset JIO LYF F220B hard reset, so please go through the post to know the step by step procedure to hard reset/factory reset F220B Jio phone using keypad. F220B Hard Reset FREE COMPUTER TRICKS JIO LYF F220B Hard Reset? Switch off the phone. Now hold the * key and then power on the phone . After power on r elease the power button only , continue holding of * key until see the recovery option. Now choose the Wipe Data/Factory Reset and Press Power button Then choose Yes and press Power button to select . After format it will back to recovery menu Then choose REBOOT SYSTEM AND press power key for OK. Now your F220B phone has been hard reset.
Post a Comment
Read more

New CSC Banner Download available in PSD format(December 2022)

Dear VLE, Ministry has approved new Common Branding  format for CSC Center in category wise. There are three types of designs: 1. First one is for CSCs providing general services, and which do not provide UCL or BC service. 2. Second one is for CSCs that provide both BC and UCL services. 3. Third one is for CSCs that provide BC services along with other services. All VLES are to install one of these branding boards at their CSC depending on the services provided.   3 CSC banner design download PSD file - free computer tricks Links to the Designs: Generic CSC Centre Banner:- Generic CSC Centre Banner sample Download  Generic CSC Centre Banner PSD format from the below link Generic CSC Centre Banner || Download Here BC+UCL Centre Banner:- BC+UCL Centre Banner sample Download  BC+UCL Centre Banner PSD format from the below link BC+UCL Centre Banner || Download Here BC Centre Banner:- BC Centre Banner sample Download  BC Centre Banner PSD format from t...
Post a Comment
Read more

Redmi 5A EDL Point - Redmi 5A Test Point - Redmi 5A Software Flashing EDL Test Point

 Hi friends, in this topic you will find the test point or edl point of Redmi 5A. As you know to flash or unlock the Redmi 5A phone you must need to put the phone into EDL mode, for which you need to short the test/edl point on the phone's motherboard, and here is the 100% solution with HD image of the Redmi 5A motherboard pointing the EDL point. So please check the below image and short the edl point to flash/unlock/frp unlock the phone, Thank you...... Redmi 5A EDL Test Pint - Free Computer Tricks Follow the above image and short the 2 points and connect the phone to PC it will be detected by the Computer and then you can flash/unlock the phone using Mobile Flashing Tool. Free Computer Tricks YouTube Channel https://www.youtube.com/c/FreecomputertricksIn/videos PSP Studio (ଓଡ଼ିଆ) https://www.youtube.com/user/part20001/videos
Post a Comment
Read more